Top 10 Aluminum Tube Manufacturers in China (2026): The Definitive Buyer’s Guide
Aluminum tubes in China are produced through hot extrusion, cold drawing, seamless piercing, reverse extrusion, and precision machining, available as round, square, rectangular, oval, multi-port, and custom hollow profiles. They feed the world’s largest concentrated demand pool—EV battery thermal systems, rail transit, HVAC&R, solar racking, marine, aerospace, defence, electronics, and architectural systems—where cost-to-performance, tolerance control, and export documentation decide supplier qualification.
Are you sourcing high-quality aluminum tube manufacturers in China? Whether you need 6061-T6 drawn seamless rounds, 3003 HVAC coils, 7075 aerospace hollows, large-diameter 6063 architectural tube, or custom extruded heat-exchanger multiports, choosing the right Chinese supplier impacts unit price, lead time, dimensional consistency, alloy traceability, and ASTM/EN/GB compliance. The Chinese aluminum tube and extrusion market in 2026 is shaped by export re-routing, EV thermal-management boom, aerospace localization, reverse-extrusion precision upgrades, and stricter environmental/carbon controls on electrolytic aluminium capacity.

With thousands of extruders and tube traders active domestically, the differentiator in 2026 is not “who can extrude 6063,” but who holds AS9100 / IATF 16949 / ISO 9001, controls billet-to-tube traceability, and can ship against ASTM B210 / B221 / B241 / B313 / EN 755 / GB/T 6893 with EN 10204 3.1 MTC. This guide profiles the Top 10 Aluminum Tube Manufacturers in China for 2026, ranked by production output, with selection based on annual capacity/volume, alloy coverage, seamless/drawn capability, certifications, and export reach.
1. Liaoning XMXYG Aluminium Co., Ltd. (Formerly China Zhongwang Assets)

- Website:
- Headquarters: Liaoyang, Liaoning (additional plants in Tianjin, Yingkou)
- Founded: 1993 (Restructured 2024)
- Certifications: ISO9001, ISO14001, IATF16949, AS9100, DNV
Zhongwang was the largest industrial aluminum extruder in Asia, with over 100 extrusion lines, press tonnage from 600 to 12,500 tonnes, and an annual extrusion capacity exceeding 1,000,000 tonnes. Following its 2024 strategic restructuring under Xiamen Xiangyu Group, the core assets now operate as Liaoyang Xiangyu Aluminum, retaining 23 advanced extrusion lines and 150,000 tonnes of annual capacity. Tube products span 1xxx–7xxx series, with seamless hollows up to 500 mm OD and wall thicknesses over 50 mm. AS9100 and IATF 16949 certified, serving rail, shipbuilding, aerospace, and energy sectors. By pure extrusion tonnage, it remains China’s #1 tube and hollow-section producer in 2026.
The core aluminum extrusion assets of the former China Zhongwang Group were acquired by Xiamen Xiangyu Group (a state-owned enterprise under Xiamen SASAC) through a court-led bankruptcy restructuring completed in late 2024. A new operating entity, Liaoning XMXYG Aluminium Co., Ltd., was established in December 2024 and now operates the original Zhongwang production bases in Liaoyang and elsewhere.
2. Guangdong Xingfa Aluminium Co., Ltd.

- Website:
- Headquarters: Foshan, Guangdong (plants in Jiangxi, Sichuan, Henan, Zhejiang)
- Founded: 1984
- Certifications: ISO9001, ISO14001, CE, Qualicoat, CQC
Xingfa is one of China’s most recognized aluminium profile brands, listed on the Hong Kong Stock Exchange (HK:98). With 7 production bases, over 80 extrusion lines including a 6,500-tonne press, and an annual capacity exceeding 800,000 tonnes, Xingfa produces a vast range of architectural and industrial tubes—round, square, rectangular, and custom hollows—in 6063/6061/6082/5052. It holds ISO 9001, ISO 14001, IATF 16949, DNV, and GJB9001C defence-quality certifications, and has participated in drafting 77 national and 2 international standards. Best for buyers needing high-volume, certified architectural and industrial tube with global logistics support.
3. Shandong Nanshan Aluminium Co., Ltd.

- Website:
- Headquarters: Longkou, Shandong
- Founded: 1992 (Listed 1999)
- Certifications: ISO9001, AS9100, IRIS, CCS, DNV
Nanshan Aluminium is a fully integrated aluminium group—bauxite → alumina → smelting → hot/cold rolling → extrusion → forged wheel → tube—with an aluminium profile capacity of approximately 300,000 tonnes per year. Its extrusion division produces 6061/6063/6082 structural tube, aerospace hollows, rail-transit profiles, and automotive lightweight sections. Aviation-grade certifications and direct supply to Boeing/Airbus-tier rolled-products programs make it a top pick for buyers wanting integrated-chain pricing and export-grade consistency. Nanshan’s aluminium tube output ranks among the top three nationally by integrated volume.
4. Asia-Pacific Light Alloy Technology Co., Ltd. (Jiangsu Asia-Pacific)

- Website:
- Headquarters: No. 29 Haifang Road, Haian Economic Development Zone, Jiangsu
- Founded: 2008 (listed: SZSE 002540)
Asia-Pacific Light Alloy is China’s leading automotive aluminium extrusion specialist. In 2025, the company sold 285,900 tonnes of aluminium products, with revenue of RMB 8.35 billion, making it the #1 player by sales volume in automotive/EV thermal-management tube. Its product range covers multiport extruded tubes, parallel-flow tubes, D-tubes, square tubes, and special-shaped hollows for battery cooling plates, refrigerant lines, and heat exchangers. With IATF 16949 certification and full PPAP support, it is the default choice for Tier-1 automotive buyers needing stable repeat batches.
5. Southwest Aluminium (Group) Co., Ltd. (Xinan Lu)

Southwest Aluminium is China’s flagship defence/aerospace tube and extrusion base under the Chinalco group, with a total aluminium fabrication capacity exceeding 500,000 tonnes per year. It supplies 2A12, 2024, 5052, 5083, 6061, 7075, and 7A04 seamless and structural tube for aviation, rail, and military programs, supported by in-house melting and 100MN-class presses. In the first half of 2026, Southwest Aluminium’s output grew 10.5% year-on-year, with aircraft plate, forgings, and defence-grade hollows as core products. A new 25,000-tonne dual-action extrusion press project will add 10,000 tonnes/year of large-section tube capacity. The undisputed #1 in aerospace/defence tube tonnage.
6. Northeast Light Alloy Co., Ltd. (Dongqing)

Dongqing lu is China’s oldest aluminium processor and a core supplier of plate, foil, bar, tube, and forgings for aerospace, defence, and nuclear applications. As a Chinalco subsidiary, its tube range covers 1xxx–7xxx series with tight composition control, historically feeding J-series aircraft, satellite, and strategic programmes. While total tonnage is smaller than the mega-mills above, its aerospace-grade seamless tube output is among the highest in China by value and certification level. Best for buyers needing state-backed metallurgical consistency and aerospace pedigree.
7. Conglin Aluminium Technology (Shandong) Co., Ltd.

Conglin is a heavy industrial extruder with 15 large-scale extrusion lines (660–10,000 tonnes), 8 automatic aluminium welding lines, and 6 large five-axis CNC machining centres. Annual output of industrial aluminium profiles reaches 100,000–120,000 tonnes, with aluminium tube/hollow products covering diameters from 10 mm to 600 mm. It is a specialist in rail-transit vehicle body structures, metro coaches, and lightweight commercial vehicles. Known for uniform wall thickness, clean anodizing base, and large-press capability. Strong fit for rail, machinery, and structural hollow buyers.
8. Shandong Yuhang Special Alloy Equipment Co., Ltd.

Yuhang is a high-end industrial profile specialist with 14 extrusion lines (14.5–125 MN), an annual casting capacity of 250,000 tonnes, and a profile production capacity of 150,000 tonnes. Its tube products include large-diameter seamless hollows, 6xxx/7xxx high-strength alloy tubes, and customized defence/marine profiles. Backed by a provincial engineering research centre and 200+ patents, Yuhang is a rising force in high-value seamless tube. CE-certified and export-active across Europe and Southeast Asia.
9. Northwest Aluminium Co., Ltd. (Xibei lu)

Northwest Aluminium is one of China’s three earliest major aluminium processors, originally built as a “Third Front” defence enterprise. Current capacity is approximately 15,000 tonnes, with a 2026 “precision tube base” upgrade project adding a 28 MN intelligent extrusion line and raising total capacity to 18,000 tonnes. Northwest specializes in small-batch, multi-alloy, high-value tubes—seamless, drawn, and welded—in 2xxx/5xxx/6xxx/7xxx series, serving aerospace, nuclear, shipbuilding, and defence. Its “Benma” brand is a CNPP top-10 aluminium tube brand. Ideal for buyers needing small-lot, high-spec, defence-grade seamless tube.
10. Jingmei Aluminium Industry Co., Ltd.

Jingmei is a specialized producer of aluminium plate, seamless tube, drawn bar, and extrusion for global distributors. Its cold-drawn seamless tube covers 2011/2014/2017/2024/5056/5083/6061/6082/7075/7005 in diameters from 3 mm to 125 mm, with cold-drawing tolerances of ±0.02 mm. Annual alloy aluminium output is approximately 200,000 tonnes across its group companies. Agile on mixed-size container loads and distributor-grade finishing (anodize, powder, wood grain). A CNPP-listed top-10 aluminium tube brand and a practical choice for precision small-diameter seamless tube.
Key Chinese Aluminum Tube Market Trends for 2026
- EV Multiport & Thermal Tube Surge: 3003/3103 cladded and 6xxx thin-wall extruded tube for battery cooling plates and refrigerant loops drive the fastest-growing segment, led by Asia-Pacific Light Alloy and Nanshan.
- Aerospace Localization: Southwest, Donglu, and Nanshan win more 2xxx/7xxx seamless contracts as Western dual-use lead times stay long and COMAC/C919 ramp up.
- Reverse Extrusion & Cold Draw Uplift: Southern mills advertise 0.25 mm wall control and seamless 7075 tube for electronics/aerospace sub-tiers, raising the precision ceiling.
- Export Compliance Baseline: ASTM B210/B221/B241/B313, EN 755, GB/T 6893, EN 10204 3.1 MTC, SGS/RoHS reports now expected by EU/US/ASEAN buyers.
- Capacity Discipline: China’s electrolytic aluminium cap (~45 Mt) pushes tube mills to lock billet channels early-2026, affecting spot pricing and contract allocation.
- Trader Saturation: B2B top-10 lists are crowded with resellers—buyers must separate “factory with presses” from “warehouse trader” by verifying press tonnage, billet source, and heat-treatment records.
Conclusion: Choosing Your Chinese Aluminum Tube Supplier
China pairs mega-scale integrated mills—Zhongwang/Xiangyu, Xingfa, Nanshan, Southwest—with automotive/precision extruders (Asia-Pacific Light Alloy, Yuhang, Jingmei) and defence/specialty houses (Donglu, Northwest Aluminium, Conglin). For 2026 sourcing by output:
- Highest extrusion tonnage: Zhongwang/Xiangyu, Xingfa, Nanshan
- Largest aerospace/defence tube output: Southwest, Donglu
- #1 automotive/EV thermal tube volume: Asia-Pacific Light Alloy
- Rail / thick-wall structural hollow: Conglin, Zhongwang
- Precision small-diameter seamless: Jingmei, Northwest Aluminium
Always verify: press tonnage, billet source, heat-treatment furnace calibration, UT/eddy current records, actual export licence, and whether “seamless” means extruded hollow or pierced + cold-drawn.
Looking for a Reliable Aluminum Tube Supplier?
While Chinese mills excel in scale and price, many global buyers keep a second source outside China for tariff buffering and QC cross-check. As an aluminum tube and bar manufacturer, we supply international buyer bases with:
✅ Alloys: 1060, 3003, 5052, 6061, 6063, 6082, 7075, 2024
✅ Forms: Seamless, cold-drawn, extruded, square/rectangular, reverse-extruded hollows
✅ Standards: ASTM B210 / B221 / B241 / B313, EN 755, GB/T 6893, JIS H4080
✅ Docs: EN 10204 3.1 MTC, SGS, BV, RoHS, PPAP on request
✅ Service: Mill-direct pricing & consolidated global shipping
📩 Contact us today for a 2026 quotation and alloy/tolerance consultation.

Leave a Reply
Want to join the discussion?Feel free to contribute!