Top 10 Aluminum Extrusion & Bar Manufacturers in Mexico (2026 Guide)
Introduction
Mexico is one of the most complete aluminium extrusion hubs in North America. It combines billet casting, multi-press extrusion, anodising/powder coating, precision machining and automotive-grade fabrication inside USMCA reach. The market splits into three buyer-relevant layers:
- Integrated extruders – own billet/casting, presses, finishing (Cuprum, Indalum, Valsa, Extmet, Conalum, AIPESA).
- Global extrusion players – Hydro (Reynosa precision tubing, ASI-certified) serving automotive HVACR.
- Bar / billet specialists – Transformación Puebla casts 6061/6063/6005 extrusion billet; HAL Mexico converts automotive cast parts.
This list ranks by verifiable Mexican footprint, press/casting capability, alloy coverage (6061/6063/6005/6262-class), finishing and project relevance – not by revenue vanity metrics. Capacities for private firms are indicative, not audited.
What is aluminum extrusion & bar
Extrusion forces heated aluminium billet through a die to create a fixed cross-section profile – solids, hollows, heat sinks, rails, window systems, truck body sections.
Aluminium bar is the solid round/square/flat semi-finished product, usually extruded or rolled, supplied in 6061/6063/2011/6262, used for machining, fixtures, shafts, structural frames and CNC parts.
In Mexico, extrusion is referenced to:
- ASTM B221 (extruded bars, rods, profiles)
- EN 755 series (dimensions & tolerances)
- AA alloy designation
- IATF 16949 for automotive, ISO 9001 general, QUALICOAT/QUALANOD for finishing
Typical profile/bar brackets (Mexico practical use)
- Small press (600–1,000 UST) – 7″ billet, 6063 window/door, T5
- Mid press (1,400–2,000 UST) – 7–8″ billet, 6061/6005 structural, T6
- Heavy press (2,800–3,150 UST) – 8/9″ billet, hard 6xxx, low 7xxx, automotive
- Bar stock – 6061-T6 round/square 10–200 mm; 6262 for machined parts
- Custom dies – die design + CNC + anodise/paint per RAL
Alloy guidance: 6063 for architecture/anodising, 6061/6005 for structural/transport, 6262 for machined bar, 7075 usually imported.

What counts as an “extrusion & bar manufacturer” in Mexico
For procurement, “manufacturer” means one of:
- Owns extrusion presses + billet casting / casthouse
- Runs anodising + powder coating + CNC machining in-house
- Supplies 6061/6063 bar, rod, structural profiles with MTR
- Automotive/IATF 16949 or ASI-certified site
- Converts profiles into welded/fabricated assemblies
Pure distributors excluded unless they own presses or finishing.
1. Cuprum – Monterrey (largest Latin-American extruder)

Website: https://cuprum.com/en/about-cuprum
Company Snapshot: Cuprum began in 1948 as a family aluminium workshop in Monterrey and today is the flagship extrusion platform of Grupo Cuprum / Elementia, with operations spanning Mexico and Central America. It is the only Latin-American extruder running its own automotive-grade 28 MN press line, and pairs that with a 70-plus-branch retail and industrial distribution network – unusual for a press owner.
Headquarters / Address: Av. Diego Díaz de Berlanga 95, Valle del Nogalar, San Nicolás de los Garza, Nuevo León
Founded: 1948
Key Products & Alloys: Architectural profiles, ladders, windows, industrial & automotive extrusions; 6063, 6061, hard 6xxx
Plants in Mexico: Monterrey, CDMX, Guadalajara extrusion divisions + Santa Catarina automotive site
Why It Ranks: Largest press base in Mexico; deepest finishing + distribution; automotive-grade heavy press.
2. Indalum (Grupo Industrial LM) – Monterrey

Website: https://indalum.com/
Company Snapshot: Indalum is a second-generation, family-owned Monterrey extruder with more than 40 years in the business. It has grown from a single press shop into a full cast-extrude-finish operation serving builders, solar farms and automotive tier-1s, and is widely regarded as the throughput leader among Mexico’s private extrusion houses.
Headquarters / Address: Aquiles Serdán 203, Col. Díaz Ordaz, Monterrey, N.L.
Founded: 1978
Key Products & Alloys: Profiles, conduit, solar frame, automotive; 6061/6063/6005, T4/T5/T6
Plants in Mexico: Monterrey (casting+extrusion+finish) + CDMX/Guadalajara distribution
Why It Ranks: Highest verified extrusion tonnage among private Mexican extruders; IATF + UL certified.
3. Grupo Valsa – Chalco, Estado de México

Website: https://valsa.com.mx/
Company Snapshot: Valsa grew out of a Chalco metal-fabrication shop in the late 1960s and is now run by the same family across three generations. Its edge is value-added conversion – profiles leave the plant anodised, powder-coated, punched and threaded, aimed at commercial-truck and automotive sub-assemblies rather than just mill lengths.
Headquarters / Address: Blvd. Cuauhtémoc 1202, Chalco, Edo. México
Founded: 1968
Key Products & Alloys: Custom profiles, anodised/painted extrusions, machined parts; 6061, 6063
Plants in Mexico: Chalco main plant
Why It Ranks: Best custom-profile converter for automotive + transport with finishing under one roof.
4. Extrusiones Metálicas (Extmet) – CDMX / Veracruz / Guanajuato

Website: https://extmet.es/
Company Snapshot: Extmet started in Mexico City in 1981 as an architectural-profile company and is now one of the few Mexican extruders that controls the whole chain – melting furnaces, presses, finishing and CNC – plus a plant in Valladolid, Spain. That vertical integration is its calling card with export-minded OEMs.
Headquarters / Address: Lago Victoria 74, Col. Granada, Miguel Hidalgo, CDMX
Founded: 1981
Key Products & Alloys: Integrated cast-extrude-anodise-paint profiles; 6063/6061/6005
Plants in Mexico: Texcoco, Veracruz, San José Iturbide + Spain plant
Why It Ranks: Most vertically integrated private extruder; casting-to-CNC in one chain.
5. Conalum – Tlaquepaque, Jalisco

Website: https://aluminum-extrusion.conalum.com.mx/
Company Snapshot: Conalum is a Jalisco-based extruder that has positioned itself around green aluminium and ready billet inventory. Family-managed and rooted in Tlaquepaque’s metalworking belt, it is a go-to for western Mexico industrial profiles, from lighting and signage to transport and solar.
Headquarters / Address: Hacienda La Calerilla 100, Tlaquepaque, Jalisco
Founded: 1986
Key Products & Alloys: Industrial profiles, transport/lighting/solar; 6005/6061/6063
Plants in Mexico: Jalisco extrusion + finishing
Why It Ranks: Strong western-Mexico industrial extruder with ready billet inventory and green aluminium.
6. AIPESA – Tlajomulco, Jalisco

Website: http://www.aipesa.com.mx
Company Snapshot: AIPESA is a 100% Mexican, owner-operated extruder in Tlajomulco, founded in 2010 to fill the gap between big integrated mills and small job shops. It specialises in complex, low-to-mid-volume special sections with in-house anodise, Qualicoat paint and precision machining.
Headquarters / Address: Tlajomulco de Zúñiga, Jalisco
Founded: 2010
Key Products & Alloys: Industrial/special profiles, machined bar, anodised extrusions; 6061/6063
Plants in Mexico: Tlajomulco extrusion + finishing + machining
Why It Ranks: Verified SME alternative with automated presses + anodise + CNC in one house.
7. Norsk Hydro Extrusions Mexico – Reynosa

Website: https://www.hydro.com
Company Snapshot: Hydro Extrusions Reynosa is the Mexican front door of Norsk Hydro’s global extrusion network. Commissioned in 2006 to serve the North American automotive and HVACR industries, it was Hydro’s first site in Mexico to earn ASI certification – a signal of how seriously the plant treats low-carbon aluminium and traceability.
Headquarters / Address: Reynosa, Tamaulipas
Founded: 2006 (plant); Hydro global 1905
Key Products & Alloys: Precision tubing, heat-exchanger profiles; 6xxx + low-carbon billet
Plants in Mexico: Reynosa (ASI Performance Standard)
Why It Ranks: Only ASI-certified extrusion site in Mexico; best for automotive HVACR + low-carbon profiles.
8. Transformación Puebla – San Pedro Cholula, Puebla (bar/billet specialist)

Website: https://www.transformacionpuebla.com
Company Snapshot: Transformación Puebla is a specialist, not a profile mill: for 35-plus years it has supplied the billet that other people’s presses turn into profiles. Run as a Mexican alloys house near San Pedro Cholula, it lives and dies by chemistry control, spectro-verifying every heat of 6061/6063/6005 before it leaves Puebla.
Headquarters / Address: San Pedro Cholula, Puebla
Founded: 35+ years in aluminium alloys
Key Products & Alloys: Extrusion billet/bar, 6061/6063/6005/6082, spectro-verified per heat
Plants in Mexico: Puebla casting plant
Why It Ranks: Most verifiable Mexican bar/billet supplier for extruders; USMCA-grade chemistry control.
9. HAL Aluminum México – Guanajuato (automotive conversion)

Website: https://www.halmex.com.mx
Company Snapshot: HAL Aluminum México is the Mexican arm of Hiroshima Aluminum Industries, set up to feed the El Bajío automotive boom. It is a converter rather than an extruder – high-pressure die casting and machining of structural components – but its demand for 6xxx bar and profiles makes it a key node in the local supply chain.
Headquarters / Address: Santa Fe Industrial Park, Silao, Guanajuato
Founded: 2010 (Mexico operation)
Key Products & Alloys: Automotive cast + machined aluminium structures; 6xxx automotive
Plants in Mexico: HAL 1 + HAL 2, Guanajuato
Why It Ranks: ASI-certified auto-tier converter; relevant for OEM supply chains in Bajío.
10. Regional Industrial & Solar-Frame Extruders – Bajío / Norte
Website: regional / group (no standalone public site)
Company Snapshot: This cluster is the long tail of Mexico’s extrusion industry: family-run press shops and solar-frame makers across León, Celaya, Saltillo and Hermosillo that win on lead time and custom dies rather than tonnage. Individually small, together they are the reason North-American exporters can get a short-run profile in days, not months.
Headquarters / Address: León, Celaya, Saltillo, Hermosillo
Founded: Mixed; nearshoring-driven 2020+
Key Products & Alloys: Solar frames, enclosures, transport profiles; 6063/6061
Plants in Mexico: Multiple regional press shops
Why It Ranks: Fast-turn custom dies and short runs for North-American-export sub-assemblies.
Quick Reference – Comparison Table
| # | Company | Base | Core role | Indicative throughput |
| 1 | Cuprum | Monterrey | Integrated extrusion leader | 15–18 presses |
| 2 | Indalum | Monterrey | Extrusion + finishing | ~35,000 t/yr |
| 3 | Grupo Valsa | Chalco | Custom profiles + anodise | 16,000 t/yr |
| 4 | Extrusiones Metálicas | CDMX/Ver/Gto | Cast-to-CNC integrated | 5 presses, 14 finish lines |
| 5 | Conalum | Jalisco | Industrial profiles | 7–8″ press base |
| 6 | AIPESA | Jalisco | Industrial/special + machining | 2 automated presses |
| 7 | Hydro Mexico | Reynosa | Precision tubing/ASI | ASI site |
| 8 | Transformación Puebla | Puebla | Bar/billet feedstock | 4,000 t/yr billet |
| 9 | HAL Mexico | Guanajuato | Auto cast/machine | ASI scope |
| 10 | Regional cluster | Bajío/North | Solar/industrial SMEs | Sub-10k t/yr each |
Note: “Throughput” = indicative rather than audited for private firms.
Frequently Asked Questions
Q: Who is the largest aluminium extruder in Mexico?
Cuprum (Monterrey) – largest in Latin America by press count. Indalum leads private mid-market by tonnage.
Q: Can Mexican extruders make 6061-T6 bar and hard 6xxx?
Yes. Cuprum’s 28 MN line, Indalum, Valsa, Extmet, Conalum supply 6061/6005-T6; 7075 bar is usually imported.
Q: Which suppliers are automotive-certified?
Hydro Reynosa (ASI), HAL Mexico (ASI + IATF), Indalum (IATF 16949), Cuprum automotive site.
Q: Is Mexican extrusion USMCA-compliant?
Yes – billet origin docs, MTR, USMCA declaration available from integrated extruders. Request ASTM B221 / EN 755.
Q: Where are most extruders located?
Monterrey (Cuprum/Indalum), CDMX–Chalco (Valsa/Extmet), Jalisco (Conalum/AIPESA), Bajío (HAL/Extmet Gto), Reynosa (Hydro), Puebla (Transformación Puebla).
Market Note – Nearshoring Demand Drivers
Mexico’s extrusion demand is pulled by EV/truck plants (Coahuila, Guanajuato, Puebla), solar-frame manufacturing (Bajío/Monterrey), construction retrofits (CDMX/Guadalajara), and USMCA rules favouring melted/cast-and-extruded-in-Mexico profiles. Low-carbon billet (Hydro, Transformación Puebla) is becoming a buyer requirement, not a nice-to-have.
Looking for a Reliable Aluminum Extrusion & Bar Supplier?
Looking for a reliable aluminium extrusion and bar supplier for the Mexican and North American market? As a leading aluminium manufacturer based in China, we provide competitive alternatives and complementary supply solutions for Mexico, the US and Canada.
- Products: extruded profiles, 6061/6063/6005 bar, rod, custom dies
- Certifications: ASTM B221 / EN 755 / ISO 9001 / SGS / BV
- Finishing: anodising, powder coat, CNC machining, custom tempers
- Logistics: fast shipping to Manzanillo, Veracruz, Monterrey, US border cross-docks
Contact us today for a quotation and free samples.

Leave a Reply
Want to join the discussion?Feel free to contribute!