Top 10 Aluminum Bar & Extrusion Profile Manufacturers in Russia 2026

Top 10 Aluminum Bar & Extrusion Profile Manufacturers in Russia 2026

Introduction

Russia is the resource-and-rolling-integration counterweight to the volume-driven aluminium industries of China, Europe and South-East Asia. Where Japan is a quality- and speciality-alloy powerhouse but a modest net importer by tonnage, Russia combines large primary aluminium capacity with a domestic extrusion and forging chain spanning architectural profiles, automotive and aerospace bar stock, industrial extrusions and billets. RUSAL remains the anchor of the value chain – from bauxite and alumina to extrusion billets, wire rod and rolling slabs – while mills such as KraMZ, KUMZ, SMZ and Belaya Kalitva give Russia genuine downstream extrusion capability from standard 6063 window sections to 2xxx/7xxx aerospace bar.

The rankings below follow the same in-country manufacturing-footprint logic used across the Japan, Singapore, Saudi Arabia, Turkey, Germany, Brazil, Pakistan and Australia articles in this series. Priority goes to verifiable Russian extrusion, casting and finishing assets; alloy and automotive/aerospace capability; and national service-centre coverage. Pure trading desks are excluded unless they hold a genuine domestic processing or stockholding footprint. Capacities for private firms are indicative rather than audited.

Top 10 Aluminum Bar & Extrusion Profile Manufacturers in Russia 2026

What is an aluminium bar and extrusion profile? Aluminium bar is a solid, long product supplied in round, square, rectangular or flat cross-section, produced by extrusion or drawing in alloys such as 2024, 6061, 6063, 6082, 7075 and Russian-designation equivalents (D16, AD31, AD33, AD35). Extrusion profiles are shaped cross-sections pushed through a die from a heated billet – from simple angles and channels to complex architectural systems, heat sinks and aerospace stringers. Rod and bar generally run 6-12 m in standard length; extruded profiles are specified to GOST 22233 / GOST 8617 and EN 755 (bar) / EN 12020 (profiles). In Russia, extrusions are also covered by GOST 21488 (rod) and GOST 18482 (wire).

1. Kamensk-Uralsky Metallurgical Works (KUMZ) – Kamensk-Uralsky

Kamensk-Uralsky Metallurgical Works (KUMZ) - Kamensk-Uralsky

Website: https://www.kumz.ru/en/

Founded:  1944

Address:  5, Zavodskaya Street, Kamensk-Uralsky, Sverdlovsk Oblast, Russia

Throughput:  >70,000 items across 150 aluminium and magnesium alloys

Main Products:  Extruded round, square and rectangular bar (2xxx, 5xxx, 6xxx, 7xxx); drawn rod; standard and custom extrusion profiles; plate, sheet, forgings, rolled rings; casting-house billets.

KUMZ is a powerful industrial complex and one of Russia’s leading suppliers of high-tech aluminium-alloy products. Its rolling production makes coil, sheets and plates of unique dimensions, alongside extruded products, forgings, a casting house, cutting and rough machining and special alloys. With 80 years of experience in aluminium alloys, KUMZ is the leader of the federal rating among Russian manufacturers of aluminium rolled products and ranks first in terms of technological equipment among enterprises in the deep aluminium-processing sector in Russia and Europe. Its extruded-bar and profile range covers 2xxx, 5xxx, 6xxx and 7xxx series for aircraft construction, marine and river shipbuilding and trailed machinery. For procurement purposes KUMZ is the Russian answer to an aerospace bar and plate house – smaller than RUSAL by tonnes of primary metal, but critical in high-strength extruded shapes and rings.

2. Krasnoyarsk Metallurgical Plant (KraMZ) – Krasnoyarsk

Krasnoyarsk Metallurgical Plant (KraMZ) - Krasnoyarsk

Website: https://kramz-trade.ru/

Founded:  1969

Address:  42, Pogranichnikov Street, Krasnoyarsk, Krasnoyarsky Krai, Russia

Throughput:  180,000 t/yr

Main Products:  Extruded round, square, rectangular and drawn bar; extruded and drawn tube; standard and custom profiles (1xxx, 6xxx); billets (1xxx-7xxx); forgings, stampings; powder coating, anodising, die production.

KraMZ is one of the most modern processing plants in Russia and the third biggest by capacity, located in an industrial area alongside its main supplier, the Krasnoyarsk Aluminium Smelter, which lets it use liquid aluminium and avoid the additional cost of melting the metal. Its product mix includes casting products (billets of 1xxx, 2xxx, 3xxx, 5xxx, 6xxx, 7xxx for extrusion), extruded products (round, square, flat and rectangular bars in 2xxx, 5xxx, 6xxx, 7xxx; cold-drawn rod; seamless tubes; custom technical profiles in 2xxx-7xxx and standard structural profiles in 1xxx/6xxx), plus forgings and die-forgings. KraMZ ships to more than 37 countries and leads in aluminium bridges and infrastructure solutions (footbridges, lighting poles). It is the Russian equivalent of a European systems-extruder plus industrial-bar mill combined under one roof.

3. Samara Metallurgical Plant (SMZ) – Samara

Samara Metallurgical Plant (SMZ) - Samara

Website: https://www.samara-metallurg.ru/

Founded:  1960

Address:  29, Alma-Atinskaya Street, building 33/34, Samara, Russia

Throughput:  ~450,000 t/yr (group rating); extrusion/forging lines integrated

Main Products:  Extruded bar and profiles; press and die forgings; rolled rings; flat-rolled sheet and plate; aerospace, automotive, packaging, shipbuilding and construction semis.

SMZ is one of Russia’s largest producers of fabricated aluminium, employing approximately 3,000 people across four core production units: Casthouse, Flat-Rolled Products, Extrusions and Forgings. Its manufacturing facilities include a casthouse, rolling mills and a variety of vertical and horizontal hydraulic presses for extrusion and forging. Semi-finished products are produced out of all kinds of aluminium alloys and are compliant with leading international and Russian standards. The plant is certified to ISO 9001, AS 9100, TS 16949 and ISO 14001, and was the first aluminium-processing plant in Russia certified against ASI standards. For buyers of extruded bar, SMZ is the closest Russian equivalent to Kobe Steel’s integrated alloy-and-forming model – casthouse through to finished forged and extruded product in a single site.

4. Belaya Kalitva Metallurgical Plant (BKMPO) / BK-ALPROF – Belaya Kalitva

Belaya Kalitva Metallurgical Plant (BKMPO) / BK-ALPROF - Belaya Kalitva

Website: https://www.bkalprof.ru/

Founded:  1954 (BKMPO); 2003 (BK-ALPROF)

Address:  1/2, Zavodskaya Street, Belaya Kalitva, Rostov Oblast, Russia

Throughput:  ~120,000 t/yr (BKMPO legacy); ~18,000 t/yr (BK-ALPROF extrusion)

Main Products:  Extruded bar and profiles; rolled plate, sheet, coil and tread plate; press and die forgings; 6060/6063 extrusion profiles; powder coating and anodising; translucent structures.

Belaya Kalitva is one of Russia’s historic aluminium semi-finished plants, acquired by RUSAL in 2002, combining a large integrated works (BKMPO, commissioned in 1954, rated ~120,000 t/yr, ISO 9001 certified) with a modern dedicated extruder, BK-ALPROF (created 3 June 2003). BK-ALPROF runs its own foundry producing solid extrusion billets in diameters 127, 145, 152 and 178 mm, with total extrusion capacity of up to 18,000 tonnes per year and two powder-colouring lines; its raw materials comply with GOST 4784-97 and DIN-EN 573-3, and product compliance with GOST 8617-81 / GOST 22233-01 is confirmed by declaration of conformity. It produces over 5,000 types of profile: general construction (angle, T-bar, I-bar, channel, strip), Provedal glazing systems, ventilated-facade subsystems, furniture profiles, floor thresholds, eaves gutters and radiator sections, all to customer drawings. NOTE: BKMPO’s integrated plant and BK-ALPROF share a site and product family, so this entry covers both the legacy mill and the modern extrusion operation verified via bkalprof.ru.

5. AL5 Industrial Group – Voronezh / Belaya Kalitva / Moscow

AL5 Industrial Group - Voronezh / Belaya Kalitva / Moscow

Website: https://al5prof.ru/en/

Founded:  2002

Address:  1A, Kalinina Street, Endovishche, Semiluki, Voronezh Region, Russia (HQ: Presnenskaya Embankment 8, Building 1, Moscow)

Throughput:  ~60,000 t/yr profiles; 6,000 t/yr ingots/month; powder coating 15,000 t/yr; anodising 6,000 t/yr; machining 12,000 t/yr

Main Products:  6060/6063 extrusion profiles; architectural and construction systems (facades, translucent structures, greenhouses); industrial profiles (tooling, mechanical engineering, shipbuilding, civil aviation); furniture and interior profiles; electrotechnical and solar-panel profiles; powder coating, anodising, mechanical processing.

AL5 Industrial Group is the extrusion leader in Russia and a reliable manufacturer and supplier of aluminium profile, holding a leading market position since 2002. It produces extrusion profiles from Al-Mg-Si system aluminium ingots, with engineers able to design any profile and develop the matrix tools for pressing; its Quality Control Department carries out independent multi-stage quality checks. The group runs a melting and casting complex of 4 furnaces, cylindrical-billet casting machines and homogenising furnaces, producing over 5,000 types of extrusion across 6xxx-series alloys. Its full cycle covers melting, casting, homogenising, pressing, quenching, powder coating, anodising and machining. AL5 supplies the Russian market, CIS and Europe year-round. It is the Russian equivalent of a dedicated architectural-and-industrial systems extruder – the direct counterpart to European systems houses – and ranked #1 in the Aluminium Association’s 2023 extrusions category.

6. ALTEK Aluminum Profile Plant – Stary Oskol

ALTEK Aluminum Profile Plant - Stary Oskol

Website: https://altekcorp.ru/?lang=en

Founded:  n/a (operating from Stary Oskol, Belgorod Region)

Address:  Industrial Centre, Transport Platform, Sh-3 passage 16A, building 1, Stary Oskol, Belgorod Region, Russia

Throughput:  Full-cycle plant; MOQ from 500 kg per profile position; lead time from 2 weeks

Main Products:  Extruded profiles (AD0, AD1, AD31, AD33, AD35, D16, 6060, 6063); facade and translucent-structure systems; casting of cylindrical ingots; painting, heat sealing, perforation, grinding, matrix manufacture.

ALTEK LLC is a family-owned company with a full production cycle for the extrusion of aluminium profiles with a wide range of applications. Its full cycle – from casting cylindrical ingots to extrusion – guarantees alloy compliance with GOST and accuracy of geometry, which is critical when installing complex facade systems and translucent structures. Reference projects include aluminium structural elements for the Crimean Bridge, the BOSCH shopping and entertainment centre in Stary Oskol, the Metrograd low-rise residential development, the Fisht Stadium and an office building in Kazan. The plant supplies profiles in AD0, AD1, AD31, AD33, AD35, D16, 6060 and 6063, works to individual drawings and technical specifications, and offers painting, heat sealing, perforation, sanding and protective film. It is the Russian equivalent of a regional full-cycle systems extruder serving infrastructure and commercial construction.

7. Astek-MT Holding – Krymsk

Astek-MT Holding - Krymsk

Website: https://www.astek-mt.ru/

Founded:  2006

Address:  Krymsk, Krasnodar Territory, Russia

Throughput:  ~25,000 t/yr finished extruded profiles; foundry ~50,000 t/yr aluminium columns; anodising 9,000 t/yr; painting 11,000 t/yr

Main Products:  Custom aluminium profiles to any complexity in AD31, AD35, AD0; KRAUSS aluminium and PVC systems; ESSE accessories and components; matrix tools (2,500 matrices/yr); powder-polymer coating; anodising.

Astek-MT is in the top five producers of extruded aluminium profile in Russia by production capacity. Its production complex is unique and closed-loop, comprising a foundry (approximately 50,000 tonnes of aluminium columns per year), a matrix-tool workshop (2,500 matrices per year), an extrusion unit with five press lines (1,100 tonnes x2, 1,460 tonnes x1, 1,880 tonnes x2, total ~25,000 tonnes of finished products per year), a painting shop (two lines, ~11,000 t/yr) and an anodising line (~9,000 t/yr). Total production area is 100,000 sq m. The company has mastered more than 6,000 types of profile, including the KRAUSS architectural system range: KRF-50 facade and modifications, KRWD-64/71 warm window-door systems with polyamide thermal break, KRLS-64 lift-slide, KRWD-45 cold systems, C640/R400 curtain wall and KRVF ventilated facade. Its products are GOST-, Rosstroy- and internationally certified and are delivered across all regions of Russia.

8. RIAK Extrusion – Magas

RIAK Extrusion - Magas

Website: https://riak-extrusion.ru/

Founded:  2011

Address:  Magas, Republic of Ingushetia, Russia

Throughput:  ~7,000 t/yr finished profiles; factory area 12,000 sq m; 1,000+ matrices mastered

Main Products:  Architectural and construction extrusion profiles (1.5-7 m); automotive, electrical and mechanical-engineering profiles; powder coating (2 lines); chemical treatment; custom non-standard profiles.

RIAK is an innovative Russian manufacturer of extrusion profiles made of aluminium alloys, specialising in profiles for the construction, automotive, electrical and mechanical-engineering industries. Its factory in Magas, Republic of Ingushetia, was founded in 2011 and is equipped with modern European equipment with a computer-based automated control system, enabling precision architectural and construction profiles from 1.5 to 7 metres as well as non-standard products to specification. The plant has two extrusion presses, a chemical-treatment shop ahead of powder coating, two powder-coating lines and an automatic packing line; it uses dies from leading European manufacturers. All finished products come with certificates of conformity, and RIAK supplies throughout Russia and the CIS, Turkey, the UAE and the EU. It is the south-Russian modern extruder with the strongest export orientation among the private mills in this list.

9. VILS (All-Russian Institute of Light Alloys) – Moscow

VILS (All-Russian Institute of Light Alloys) - Moscow

Website: https://www.oaovils.ru/

Founded:  1961

Address:  2, Gorbunova Street, Moscow, 121596, Russia

Throughput:  Closed metallurgical cycle; 101 patents; 1,001-5,000 employees

Main Products:  Extruded and forged special-alloy bar, wire rod, powder-metallurgy products, sheet and tube; aluminium, magnesium, titanium, nickel and superalloy semis; laminated and composite materials; special tool coatings.

VILS (All-Russian Institute of Light Alloys, JSC) is a strategic enterprise in the creation of new technologies and production of metallurgical products from special alloys, with a closed metallurgical production cycle integrated with its test and research base. It was formerly the VILS Scientific Production Association and consists of the All-Russian Institute of Light Alloys, the Light Alloy Works and the Zubtsov Engineering Plant. Rostec is the largest shareholder with 39%. The institute markets extrusions, forgings and semi-finished metallurgical products as well as laminated and composite materials, special coatings for tools and designs for metallurgical equipment. Practically all products manufactured are exclusive and high-tech and require permanent scientific supervision. VILS is included here because no Russian special-alloy bar and extrusion list is complete without it – it is the research-and-production analogue of a Japanese special-alloy mill, bridging alloy development with extruded and forged semis.

10. Russian Aluminum Bar & Profile Service Centres (Category Entry)

Russian Aluminum Bar & Profile Service Centres

Reference site:  most1.ru (MOST-1 Metal Processing Centre)

Founded:  mid-2000s (MOST-1 processing layer)

Address:  6, Proyezzhaya Street, Mytishchi, Moscow Region, Russia (warehouses in Moscow, St Petersburg, Samara, Ekaterinburg)

Throughput:  2,300+ t minimum aluminium stock held; 3 water-cutting machines, 5 hydraulic cranes, 7 lift trucks

Main Products:  Round, square and flat bar; extruded profiles; tubes and rods; cut-to-length, slitting, water-jet cutting, sawing; warehouse and delivery services.

No Top 10 of Russian aluminium bar and extrusion is complete without naming the service-centre layer. The MOST-1 Metal Processing Centre is equipped with three modern water-cutting machines for longitudinal and transverse cutting and a circular saw; its loading unit has five hydraulic telpher cranes and seven lift trucks and can simultaneously load ten automobiles. The warehouse uses a product barcode system to save shipping time, with more than 2,300 tonnes of semi-finished aluminium products held minimum. Supplied ranges include slabs, sheets, rods, strips, pipes, forgings, stamps, wires and bars, used in aerospace, shipbuilding, chemical, oil and gas, transport, electrotechnical and consumer-goods sectors. Like the Saudi, Turkish, Australian and Pakistan articles in this series, this entry separates coaters and converters from the mills above: Russian plants make the billet, extrude the bar and profile, while service centres make it deliverable in the right alloy, temper, gauge and cut length.

Quick Reference

# Company Base Core Extrusion/Bar Role Throughput (est.)
1 KUMZ Kamensk-Uralsky Aerospace bar, profiles, forgings, rolled rings >70,000 items; 150 alloys
2 KraMZ Krasnoyarsk Industrial bar/tube/profiles; bridge & facade systems 180,000 t/yr
3 Samara Metallurgical Plant (SMZ) Samara Integrated extrusion, forging, flat-rolled semis ~450,000 t/yr (group)
4 Belaya Kalitva (BKMPO / BK-ALPROF) Rostov Oblast Extruded profiles, plate, forgings; 6060/6063 profiles ~120,000 t/yr + 18,000 t/yr
5 AL5 Industrial Group Voronezh / Moscow Architectural & industrial extrusion leader ~60,000 t/yr profiles
6 ALTEK Stary Oskol Full-cycle profiles for facades & infrastructure 500 kg MOQ; full cycle
7 Astek-MT Krymsk Top-5 extruder; KRAUSS facade systems ~25,000 t/yr; 6,000+ profiles
8 RIAK Magas (Ingushetia) Architectural & industrial profiles, export-oriented ~7,000 t/yr; EU/CIS export
9 VILS Moscow Special-alloy bar, forgings, powder metallurgy Strategic R&D mill; 101 patents
10 Service Centres / MOST-1 Moscow / multi-city Cut-to-length, sawing, stockist layer 2,300+ t stock

Throughput = bar/profile volume handled through the Russian entity; capacities for private firms are indicative rather than audited. Group capacities are not Russian domestic output alone.

Note on extrusion versus rolling

Entries #1-#4 and #9 are integrated metallurgical plants that roll as well as extrude; their group capacities include rolled sheet and plate, not extrusion alone. Entries #5-#8 are dedicated extrusion operations and their figures relate principally to pressed profiles and bar. Buyers seeking aerospace-grade 2xxx/7xxx extruded bar should look first to KUMZ (#1) and VILS (#9); buyers of architectural 6060/6063 systems should prioritise AL5 (#5), Astek-MT (#7) and BK-ALPROF (#4); buyers of industrial bar, tube and custom profiles should treat KraMZ (#2) and SMZ (#3) as the reference mills.

Frequently Asked Questions

Q: Who is the largest aluminium extrusion and bar manufacturer in Russia?

A: By integrated alloy and extrusion capability, KUMZ is Russia’s leading special-alloy bar, profile and forging house, while KraMZ (180,000 t/yr) is the largest by total processing capacity. Among dedicated profile extruders, AL5 is the market leader, with Astek-MT and BK-ALPROF in the top five by capacity.

Q: Does Russia produce its own aluminium bar and extrusion profiles?

A: Yes – at a technologically high level. Russia combines RUSAL’s primary metal and billet output with domestic extrusion at KUMZ, KraMZ, SMZ, Belaya Kalitva, AL5, ALTEK, Astek-MT and RIAK, covering commodity 6060/6063 sections through to 2xxx/7xxx aerospace bar and rolled rings. It is one of the few countries with a complete chain from bauxite to extruded and forged semi-finished product.

Q: Which alloys are readily available in Russia?

A: 6060, 6061, 6063, 6082 and Russian-designation AD31/AD33/AD35 are stock items for architectural and industrial profiles. KUMZ, KraMZ, SMZ and VILS supply 2024, 5052/5083, 7075 and equivalents (D16, V95, 1960) for aerospace, defence and high-strength applications. GOST 22233 / GOST 8617 and EN 755 / EN 12020 are the reference specifications.

Q: Where are most extrusion plants located?

A: Concentrated in three clusters: the Urals (Kamensk-Uralsky – KUMZ; Verkhnyaya Salda – VILS/VSMPO), Southern Russia (Belaya Kalitva – BKMPO/BK-ALPROF; Krymsk – Astek-MT; Stary Oskol – ALTEK; Magas – RIAK) and Siberia (Krasnoyarsk – KraMZ). The Moscow Region hosts service centres and stockists such as MOST-1. Export hubs are St Petersburg, Novorossiysk and Vladivostok.

Q: Why were Arconic/Alcoa and Western systems houses left out of the Top 10?

A: The same reason as in the Japan, Singapore, Saudi Arabia, Turkey, Germany, Brazil, Pakistan and Australia articles: the title is ‘manufacturers in Russia’. Arconic SMZ is now Samara Metallurgical Plant under Russian ownership (2022), and Belaya Kalitva has been part of RUSAL since 2002. Offshore brands reach Russia through traders and service centres (#10) and are not double-counted as local manufacturers.

Q: Are Russian extruded bar and profiles certified?

A: Major integrated plants run ISO 9001 systems; SMZ additionally holds AS 9100, IATF 16949, ISO 14001 and ASI certification. BK-ALPROF’s products carry declaration of conformity to GOST 8617-81 and GOST 22233-01; AL5, ALTEK and RIAK provide certificates of conformity. Buyers should request mill cert, batch number, alloy temper and a GOST/EN cross-reference, especially for anodising and critical structural use.

Market Note – Russia’s Self-Containment Era

Russia’s aluminium-bar and extrusion market is the inverse of Japan’s: abundant primary metal and billet, plus a large installed extrusion base, but loss of European automotive and aerospace customers after 2022. Domestic demand from construction, rail, defence, EV and battery enclosures, and solar mounting absorbed displaced volume, keeping extrusion shipments above ~800,000 t/yr.

The 2026 structure is: RUSAL = billet, wire rod and primary feedstock; KUMZ / KraMZ / SMZ / BKMPO = integrated bar, tube, profile, forging and rolled ring; AL5 / ALTEK / Astek-MT / RIAK / BK-ALPROF = dedicated pressed profiles and architectural systems; VILS = special-alloy R&D and production; MOST-1 and regional service centres = conversion and distribution; China, Turkey, India and the UAE = export outlets for Russian billet, bar and profile.

Value is shifting from commodity ingot to domestic extrusion, anodising, powder coating and finished systems – exactly the segment where Russian mills are investing and where Chinese, Turkish and ASEAN buyers now source semi-finished aluminium.

Looking for a Reliable Aluminum Bar & Profile Supplier?

As a China-based aluminium bar and extrusion manufacturer, we supply complementary and substitute material to Russian and Eurasian buyers:

  • Alloys: 1050, 3003, 5052, 5083, 6061, 6063, 6082, 2024, 7075
  • Rod, bar (round/square/flat), standard and custom extrusion profiles
  • Mill-direct price with no intermediaries
  • EN755 / EN12020 / GOST 22233 / GOST 8617 compliance; EN10204 3.1 available
  • Anodising-quality 6063 and 6061; large 2xxx/7xxx bar on request
  • Fast shipment to Vladivostok, St Petersburg, Novorossiysk and Moscow warehouses

Contact us today for a quotation, die/mould development support and free samples.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *