Top 10 Aluminum Bar & Extrusion Profile Manufacturers in Europe (2026 Guide)

Top 10 Aluminum Bar & Extrusion Profile Manufacturers in Europe (2026 Guide)

Introduction

This guide ranks the top 10 aluminum bar and extrusion profile manufacturers operating in Europe in 2026, selected by verified extrusion capacity, geographic footprint and buyer relevance. The list deliberately covers the full European market rather than concentrating on a single country: the top tier spans Norway, France, Spain, Italy, Switzerland, Austria, Belgium and Greece. Where figures are not publicly disclosed by the company, ranking is based on published press fleet, alloy coverage, certification status and end-market relevance rather than tonnage. Capacities stated for diversified producers are extrusion capacity figures, not primary-aluminum output or group rolling volume.

A note on scope: ‘extrusion profile’ is used here in the European sense of solid and hollow extruded shapes — round/square/flat bars, tubes, open sections, T-slot and heat-sink profiles, and structural profiles (EN 755 / EN 12020). Companies whose output is dominated by flat-rolled products are excluded from this ranking and listed explicitly in the honorable-mentions section.

European extrusion in 2026 is defined by low-carbon billet, ASI certification, tight EN 755 tolerances, in-house anodizing and powder coating, and mature automotive and aerospace documentation. Buyers increasingly specify recycled-content billet, EPD-backed profiles and IATF 16949 / EN 15088 compliance rather than chasing the lowest price per kilogram.

Top 10 Aluminum Bar & Extrusion Profile Manufacturers in Europe (2026 Guide)

What Is an Aluminum Extrusion Profile?

An aluminum extrusion profile is a product formed by forcing heated aluminum billet through a die. In Europe the product forms and nomenclature align with EN 755 / EN 12020:

Product form Typical description
Solid bar / rod Round, square, flat, hexagonal; used as stock or machined parts
Open profile Angles, channels, T-slot, heat sinks, frames; single die opening
Hollow profile / tube One or more closed cavities; includes seamless tube
Structural / automotive profile 6082 / 6061 crash, battery-tray and chassis sections

1. Hydro Extrusions (Norsk Hydro ASA)

Hydro Aluminium UK Ltd

Attribute Details
Website https://www.hydro.com/en/our-business/extrusions
Headquarters Oslo, Norway (European extrusion across Norway, Germany, France, Italy, UK, Spain, Poland, Czechia, Netherlands, Sweden, Austria)
Founded 1905 (Norsk Hydro); extrusion business formerly branded Sapa
Extrusion capacity ~1,300,000 t/y group worldwide (~600,000+ t/y in Europe); ~40 extrusion locations worldwide
End-markets Construction, transport, engineering, automotive, anodized architectural, industrial

About Hydro Extrusions (Norsk Hydro ASA)

Hydro Extrusions is the world’s largest aluminum extrusion producer, operating around 40 extrusion locations across Europe, Asia and North America. In Europe it combines billet casting, extrusion, surface treatment, fabrication and technical consulting across a network of plants. Its German plants run EN AW 6005A, 6060, 6063, 6081, 6082, 6101B and 1050A profiles, with anodizing, CNC fabrication, ASI Performance + Chain of Custody, ISO 9001/14001/45001/50001, EN 15088 and EPDs for mill-finish, anodized and coated profiles. Named European plant capacities include Offenburg 18,000 t/y (two lines, +/- 0.05 mm tolerance), Albi 26,000 t/y, Ornago 25,000 t/y (IATF 16949 for automotive custom profiles) and Rackwitz 40,000 t/y. Hydro REDUXA low-carbon billet and Hydro CIRCAL recycled aluminum back the group’s sustainability positioning for EU buyers responding to CBAM and Scope-3 reporting.

Key Products & Alloys

Architectural and industrial profiles in 6005A/6060/6061/6063/6082/6101B, anodized and powder-coated sections, functional small profiles, hollow and seamless tube capability, and ready-to-install fabricated components. Ornago’s automotive offering includes extruded profiles plus fabrication and surface treatment under IATF 16949, with alloys 6060, 6063, 6463, 6005A, 6061, 6082 and 6026LF.

Why It Ranks 1

With ~40 extrusion locations worldwide, a network of verified European plants and the broadest alloy, finishing and EPD offering in the region, Hydro is the volume and documentation leader in European aluminum extrusion by a clear margin.

2. Constellium SE (Soft Alloys Europe & Automotive Extrusion)

Constellium SE

Attribute Details
Website https://www.constellium.com/  and  https://www.constellium.com/automotive-extrusion-based-components
Headquarters Paris, France (European plants in France, Slovakia, Czechia, Switzerland, UK, Italy)
Founded 2011 (spun off from Rio Tinto Alcan); Euronext-listed (CSTM)
Extrusion capacity Soft Alloys Europe: e.g. Levice (Slovakia) runs 4 extrusion lines at 25-44 MN; group automotive extrusion network across Europe
End-markets Automotive body structure, Crash Management Systems, EV battery enclosures, building & construction

About Constellium SE (Soft Alloys Europe & Automotive Extrusion)

Constellium is a global leader in the development, manufacturing and recycling of aluminum products and solutions, serving packaging, automotive, aerospace and general engineering markets. Its Soft Alloys Europe network has more than four decades of extrusion experience, offering complex-geometry sections, tight tolerances, thin walls, precise mechanical properties and high surface quality. The Levice plant (Slovakia) operates four extrusion lines with press forces of 25 to 44 MN and lengths up to 15 meters, running alloys 6060, 6106, 6351, 6005A and 6082, with available profiles from 100×250 mm to 340×50 mm and 200 g to 20 kg per meter, plus integrated anodizing, thermal break, bending, CNC machining, sawing and punching. Constellium’s Automotive Extrusion-Based Components business supplies Crash Management Systems and body structure components for global OEM programs including the Audi e-tron and BMW X5.

Key Products & Alloys

Soft-alloy extrusions in 6060/6005A/6082/6106/6351 for building and industrial use; automotive extrusion-based safety and structural components; HSA6 high-strength 6xxx alloys for Crash Management Systems and EV battery enclosures (15-30% lighter than conventional aluminum alloys, with >80% recycled-content capability).

Why It Ranks 2

With proprietary HSA6 high-strength alloys, a vertically integrated automotive offering from alloy development and casting through extrusion, prototyping, testing and series production, and four decades of soft-alloy extrusion expertise, Constellium is Europe’s leading specialty automotive and high-value extruder.

3. Exlabesa (Spain / UK / France / Germany / Poland / Portugal)

Exlabesa Extrusions Doncaster Ltd

Attribute Details
Website https://exlabesa.com/en/
Headquarters Galicia, Spain (10 production centres across Spain, UK, Germany, Poland, Portugal, France, plus USA and Morocco)
Founded 1968 (Flandria Aluminium, its French/Belgian arm, founded 1956)
Extrusion capacity 238,000 t/y (29 extrusion presses 1,300-8,500 tonnes); 238,000 t/y post-Portugal expansion
End-markets Construction, automotive, transport, infrastructure, renewable energy

About Exlabesa (Spain / UK / France / Germany / Poland / Portugal)

Exlabesa is a multinational leader in high-value industrial aluminum extrusion with a history of more than half a century and commercial presence in 40 countries. Following the 2023 acquisition of Flandria Aluminium (turnover >€720m, 200,000 t capacity, 1,800 employees), the group operates 29 presses ranging from 1,300 to 8,500 tonnes and has reached 238,000 tonnes of annual extruded output. It runs two of the largest extrusion presses in Europe at 6,500 and 8,500 tonnes, capable of profiles up to 700 mm wide, 28 m long and 120 kg/m. Finishing capacity includes 32 high-precision CNCs, 3 large-format bending centres (up to 23 m), 12 thermal-break lines, 5 anodizing lines (Qualanod) and 11 coating plants (Qualicoat Seaside/Qualimarine) for profiles up to 14 m. Exlabesa operates advanced recycling plants producing more than 80,000 t/y of recycled billets; its RE-local billet has a footprint of 2.95 kg CO2e/kg verified by Bureau Veritas under ISO 14067 (82% below European primary aluminum).

Key Products & Alloys

Macro-extruded large profiles up to 700 mm, automotive and rail structural sections, industrial components, solar structures, anodized and powder-coated architectural profiles, and recycled low-carbon billet.

Why It Ranks 3

At 238,000 t/y with 29 presses including two of Europe’s largest, Exlabesa is the largest independent extrusion group in Southern Europe and a macro-extrusion leader; its RE-local recycled billet adds a documented low-carbon offering.

4. Metra (Italy)

METRA Aluminium

Attribute Details
Website https://www.metra.eu/en/
Headquarters Rodengo Saiano (Brescia), Italy (3 Italian extrusion sites: Rodengo Saiano, Concesio, Curno)
Founded 1964
Extrusion capacity Group 145,000-190,000 t/y; own foundry 50,000 t/y; 9 presses
End-markets Architecture, industry, transport, marine

About Metra

Metra is Italy’s leading aluminum extrusion group, operating three extrusion plants in Italy with a total of nine presses ranging from 16 MN to 80 MN, and a dedicated foundry producing 50,000 t/y of billets. The group supplies architectural systems (windows, doors, facades), industrial profiles and marine extrusions, with high-quality anodizing and powder coating in-house. Metra serves over 40 countries and holds ISO 9001, ISO 14001 and EN 1090 certifications, making it the reference point for Italian extrusion both domestically and across the Mediterranean basin.

Key Products & Alloys

EN AW 6060, 6063, 6005A, 6082 and 6061 profiles; architectural systems, industrial profiles, marine extrusions and anodized decorative sections.

Why It Ranks 4

Metra is the undisputed Italian market leader with fully integrated billet-to-finish production and one of the broadest press fleets in Southern Europe, earning the top Italian position in the ranking.

5. Alu Menziken Extrusion GmbH / Group (part of Mengtai Germany GmbH)

 

Attribute Details
Website https://www.alu-menziken.com/en/extrusion/
Headquarters Reinach, Switzerland (operations in Switzerland, Germany, Austria, Romania)
Founded 1893 (group heritage); European extrusion operations long established
Extrusion capacity ~30,000 t/y; 6 presses 8-60 MN; group ASI-certified European extrusion capacity >40,000 t/y
Presses 8 / 11 / 15 / 16 / 35 / 60 MN direct extrusion; seamless-tube capability

About Alu Menziken Extrusion GmbH / Group (part of Mengtai Germany GmbH)

Alu Menziken runs some of the most modern precision extrusion presses in Europe. Its official extrusion page confirms high-tech extrusion lines among the most modern in Europe, processing 3xxx, 4xxx, 5xxx, 6xxx and 7xxx alloys with an annual capacity of approximately 30,000 MT and manufacturing tolerances from +/- 0.02 to 0.15 mm. The listed press fleet is 8 / 11 / 15 / 16 / 35 / 60 MN. The group processes 3xxx-7xxx alloys, with automotive crash alloys developed jointly with German OEMs. ASI certifies the group’s extruded profiles and tubes operations at its European facilities (Performance Standard V3.1, Chain of Custody). Since 2024 the group has been part of Mengtai Germany GmbH (Inner Mongolia Mengtai Group, China-owned) while retaining its European engineering base.

Key Products & Alloys

Complex cross-sections and tubes in 3xxx/4xxx/5xxx/6xxx/7xxx, automotive crash alloys, pneumatic and rail profiles, aerospace tubes, and high-surface-quality industrial sections. Profiles up to 63 m at the press, cut and aged in-house; CNC, anodizing and powder coating across the certified group.

Why It Ranks 5

With a stated ~30,000 MT annual capacity, presses from 8 to 60 MN, +/- 0.02 mm tolerances and 3xxx-7xxx coverage, Alu Menziken is Europe’s leading precision extruder by technical depth, the strongest challenger to Hydro for demanding industrial and mobility profiles.

6. CORTIZO (Spain)

CORTIZO (Spain)

Attribute Details
Website https://buildreview.org/cortizo/
Headquarters Padrón (A Coruña), Spain (5 production centres in Spain; operations across 31 countries)
Founded 1972
Extrusion capacity 75,824 t in latest reported year; 16 extrusion presses; 43,000 t/y foundry; 8 presses / 55,500 t/y profile capacity across 5 Spanish centres
End-markets Architectural systems, facades, solar protection, industry

About CORTIZO (Spain)

Founded in 1972 in Padrón (A Coruña), CORTIZO is Spain’s principal manufacturer and distributor of aluminum systems for architecture and a European benchmark, with presence in 60 countries and turnover of €554 million. The company completes the full production cycle internally: smelting, extrusion, powder coating, anodizing, chemical brightening and machining across its own centres. Its assets include 16 extrusion presses, 16 powder-coating plants, 2 foundries, 6 anodizing plants, 3 machining plants, 2 chemical-brightening plants and fitting/joints/composite-panel factories. The foundry has a 43,000 t production capacity and stocks EN AW-1050, 6005, 6060, 6063, 6082, 6106 and 6463. CORTIZO holds Qualanod, Qualicoat, Qualicoat Seaside and Qualideco licences, and its sales split is 29% national / 71% international (Germany 32%, France 24%, UK 11%, Portugal 7%).

Key Products & Alloys

Architectural window, door, facade, balustrade and solar-protection systems; industrial profiles; cast, extruded, anodized and powder-coated sections; thermal-break profiles and composite panels.

Why It Ranks 6

CORTIZO is Spain’s architectural-systems reference with full in-house vertical integration and the broadest finishing and foundry capability among European system houses, ranking ahead of pure extruders on systems documentation and export reach.

7. Aliplast Extrusion (Corialis Group: Belgium / Poland)

Aliplast Extrusion

Attribute Details
Website https://www.aliplastextrusion.com/en/home
Headquarters Lokeren, Belgium (extrusion plants in Belgium, Poland, France, UK, Germany)
Founded Parent GUTMANN Group from 1962; Aliplast / Corialis network long established
Extrusion capacity Lokeren ~25,000 t/y; Lublin (Poland) 4 lines ~50,000 t/y; network 10 extrusion lines
End-markets Construction, industry, transport, renewable energy

About Aliplast Extrusion (Corialis Group: Belgium / Poland)

Aliplast is the Belgian extrusion anchor of the Corialis European extrusion network (Aliplast/Belgium, Smart/UK, Profils Systèmes/France, GUTMANN/Germany). The GUTMANN Group operates ten extrusion lines across its sites and supplies anodized and powder-coated architectural systems. Aliplast’s Lokeren plant runs at approximately 25,000 t/y and its Lublin (Poland) facility operates four extrusion lines at close to 50,000 t/y, making the network one of the largest architectural extrusion operations in the Benelux and Central European region. Both plants offer anodizing and powder coating in-house.

Key Products & Alloys

Anodized and powder-coated window, door and facade profiles, industrial framing, solar mounting, and system-builder sections with in-house surface finishing and fabrication.

Why It Ranks 7

Aliplast/Corialis combines Benelux architectural expertise with a major Polish extrusion base, giving it both Western-European quality systems and cost-competitive volume capacity — a genuine pan-European supply option.

8. Eural Gnutti S.p.A. (Italy)

Eural Gnutti S.p.A. (Italy)

Attribute Details
Website https://aluminium-stewardship.org/about-asi/members/EURAL-GNUTTI-S-p-A-
Headquarters Rovato / Pontevico, Brescia, Italy
Founded Long-established; Eural Gnutti group heritage
Extrusion capacity Not individually published; medium-scale specialty extruder with integrated foundry and cold-drawing
End-markets Mechanical engineering, hydraulics, pneumatics, electrical, transport

About Eural Gnutti S.p.A.

Eural Gnutti is a long-established Italian manufacturer of extruded, drawn and cold-rolled aluminum semi-finished products, combining a Pontevico foundry and billet operation with extrusion and cold drawing at Rovato. The company’s ASI Performance Standard V3.1 certification scope covers the production of extruded, drawn and rolled aluminum semi-finished products. It is alloy-knowledgeable and oriented to industrial supply — round, square and hexagonal bars, tubes and precision profiles — rather than pure construction, making it the go-to Italian alternative for bar stock and tight dimensional control.

Key Products & Alloys

Extruded and cold-drawn aluminum bars (round, square, hexagonal), tubes, precision industrial profiles, and small-to-medium batch sections with downstream drawing, rolling and finishing.

Why It Ranks 8

Eural Gnutti’s ASI-certified integration of casting, extrusion and cold finishing makes it Italy’s bar-and-tube specialist, ranking ahead of architectural-only extruders on dimensional capability and industrial market focus.

9. Hammerer Aluminium Industries (HAI, Austria)

Hammerer Aluminium Industries (HAI, Austria)

Attribute Details
Website https://www.hai-aluminium.com
Headquarters Ranshofen, Upper Austria (9 locations: Austria, Germany, Poland, Romania)
Founded 2007 (Ranshofen extrusion plant heritage from the 1950s)
Extrusion capacity 125,000 t/y; 13 extrusion lines; recycling & casting capacity 250,000 t/y
End-markets Automotive, transport, construction, electrical engineering, mechanical engineering

About Hammerer Aluminium Industries (HAI, Austria)

Hammerer Aluminium Industries (HAI) is a family-owned international group employing around 2,100 people, with nine European facilities covering casting, extrusion, fabrication and finishing, and €890m turnover in 2023. The group now operates 13 extrusion presses with 125,000 t/y capacity, plus 250,000 t/y of recycling and casting capacity. Its Ranshofen headquarters runs three modern 12-inch presses and one 10-inch press, including the 60 MN P60 (2022) and P61 (June 2024) lines installed under a €125m investment package that also delivered a 14,000 m2 logistics centre. P61 uses a Presezzi 60 MN front-loading press with billets 600-1,750 mm, Eco Shower Unit (up to 17% energy saving) and automated handling, producing highly complex automotive profiles with excellent crash properties. HAI offers SustainAl 2.0 (up to 80% recycled content) and SustainAl 4.0 (renewable-energy primary aluminum); group CO2 emissions are well below the European average.

Key Products & Alloys

Complex automotive and transport profiles with crash properties, architectural and industrial sections, extruded, cast, fabricated and finished components, and low-carbon SustainAl alloys.

Why It Ranks 9

HAI’s 125,000 t/y across 13 lines, integrated 250,000 t/y recycling and casting operation and €125m investment in two 60 MN automotive lines make it the leading Alpine-region extruder and a top-tier transport-sector supplier.

10. ALUMIL S.A. (Greece)

ALUMIL S.A. (Greece)

Attribute Details
Website https://www.alumil.com
Headquarters Industrial Area of Kilkis, Greece (subsidiaries across 60+ countries, 32 subsidiaries)
Founded 1988 (Mylonas family; originated from Aluminium Industry of Northern Greece)
Extrusion capacity Multiple lines; founding 1,600 t press 7,000 t/y; Line 2 12,000 t/y; Line 3 10,000 t/y; 18,000 t/y foundry (ALUFOND); ~80% of turnover exported
End-markets Architectural systems, facades, BIPV, shading, railings, pergolas

About ALUMIL S.A.

Founded in 1988, ALUMIL S.A. is the parent of one of Europe’s largest and most technologically advanced aluminum extrusion groups, headquartered in the Industrial Area of Kilkis. It is Greece’s pioneer and preeminent company in the design, development and production of architectural aluminum systems — doors, windows, pergolas, railings, fences, curtain walls and composite aluminum sheets — and its exports consistently account for approximately 80% of turnover, reaching more than 60 countries through 32 subsidiaries. The company completed vertical integration early: a 1,600 t extrusion line (7,000 t/y) in 1990, a second 12,000 t/y line in 1996, a third 10,000 t/y line, three aging furnaces, and the ALUFOND 18,000 t/y foundry, plus horizontal and vertical powder-coating units, thermal-break and surface-protection units. ALUMIL also holds the Porsche Design license for door and window systems.

Key Products & Alloys

Architectural aluminum systems under SUPREME, SMARTIA and COMFORT sub-brands: hinged and sliding doors/windows, fire-rated and heavy-duty doors, curtain walls, atriums, pergolas, railings, fences, BIPV, decking, polycarbonate sheets, shading and noise barriers.

Why It Ranks 10

ALUMIL is the leading Southeastern European architectural-systems extruder with full vertical integration, an 80% export share and a Mediterranean/ Balkan distribution network unmatched by Western-European system houses.

Quick Comparison: European Aluminum Bar & Profile Manufacturers

# Company European base Capacity / relevance Key products
1 Hydro Extrusions Norway / France / Germany / Italy / UK / Spain / Poland / NL / SE / AT ~1,300,000 t/y group; ~600,000+ t/y Europe; ~40 locations Architectural & industrial profiles, anodizing, automotive
2 Constellium France / Slovakia / Czechia / Switzerland / UK / Italy 4 lines 25-44 MN (Levice); specialty automotive HSA6 automotive structures, soft-alloy profiles
3 Exlabesa Spain / UK / France / Germany / Poland / Portugal 238,000 t/y; 29 presses (1,300-8,500 t) Macro-extrusion up to 700 mm, RE-local recycled billet
4 Metra Rodengo Saiano / Concesio / Curno, Italy 145,000-190,000 t/y group; 9 presses; 50,000 t/y foundry Architectural systems, marine, industrial
5 Alu Menziken Switzerland / Germany / Austria / Romania ~30,000 t/y; 6 presses 8-60 MN Precision profiles & tubes, 3xxx-7xxx
6 CORTIZO Padrón / Manzanares / Granadilla / Mieres, Spain 75,824 t; 16 presses; 43,000 t/y foundry Architectural systems, facades, solar protection
7 Aliplast (Corialis) Lokeren BE / Lublin PL / France / UK / Germany Lokeren ~25,000 t/y; Lublin ~50,000 t/y; 10 lines Anodized architectural systems, Benelux + CEE
8 Eural Gnutti Rovato / Pontevico, Italy Integrated foundry + cold-drawing; ASI V3.1 Bars, tubes, cold-drawn sections
9 HAI Ranshofen AT / Germany / Poland / Romania 125,000 t/y; 13 lines; 250,000 t/y recycling & casting Automotive crash profiles, SustainAl, 60 MN presses
10 ALUMIL Kilkis, Greece Multi-line; ~80% exported; 18,000 t/y foundry Architectural systems, Mediterranean & Balkan

Honorable Mentions (not pure bar/profile extruders, or German domestic supply)

Several well-known European aluminum companies are excluded from the ranking because their output is dominated by flat-rolled products or other segments. They are listed here so buyers can place them correctly:

  • Novelis Europe — world’s largest aluminum recycler and flat-rolled sheet/plate leader; rolling capacity, not extrusion.
  • Speira (ex-Hydro Rolled Products) — rolling and recycling: ~1,000,000 t/y of advanced rolled products; Grevenbroich and Alunorf are rolling mills, not bar extruders.
  • TRIMET Aluminium SE (Essen) — primary aluminum, ingot and billet; feeds extruders rather than mainly extruding.
  • AMAG Austria Metall — premium casting and rolled products for aerospace/automotive/packaging; a value-added roller, not a bar extruder.
  • Schüco / WERU / aluplast — window, door and facade system houses; process and brand profiles rather than ranking as press mills.
  • The following German domestic-supply extruders are relevant for buyers prioritizing short logistics distances within Germany rather than pan-European tonnage, and are listed separately for that reason:
  • ALUnna TUBES (Aluminiumwerk Unna AG, Unna) — seamless and drawn tubes, rods and bars; 2024 production 8,369 t, 16,600 t/y casthouse, presses 9/25/35-40 MN.
  • AWB Aluminiumwerk Berlin GmbH (Berlin-Spandau) — precision profiles; ASI Performance Standard certified since 13 July 2022 (certificate 208, TÜV NORD CERT); Schüco strategic partner.
  • Erbslöh Aluminium GmbH (Velbert, part of WKW Group) — six hydraulic presses at 12.5-44 MN; ALMINOX® and PREMIRAL® high-purity profiles.
  • STEP-G GmbH (Bitterfeld / Bonn / Vogt) — 11 lines; Bonn ~18,000 t/y with Europe’s largest 100 MN press; ASI-certified.
  • IsoProfil GmbH & Co. KG (Wuppertal) — family-run profile systems manufacturer founded 1983; tolerances up to 20x tighter than EN 755-9 / EN 12020-2.

Procurement Guidance for Europe 2026

  • Ask for EN 755 + EN 10204 MTC, not just ‘6063’
  • European engineers expect EN AW-6060/6063/6082 with EN 755 dimensional class, EN 10204 3.1 MTC, and stated temper (T5/T6). If a supplier only quotes ‘6063 aluminum profile’ with no standard, treat it as a trading desk rather than a mill.
  • Carbon and certification matter more than in Asia
  • Specify ASI Performance and Chain of Custody, recycled billet percentage, EPD, and low-carbon billet. Hydro publishes EPDs for mill-finish, anodized and coated profiles; Exlabesa’s RE-local billet is 2.95 kg CO2e/kg (82% below European primary, ISO 14067 verified); HAI offers SustainAl 2.0 (up to 80% recycled) and SustainAl 4.0; Constellium’s HSA6 accepts >80% recycled material.
  • Match press size to geometry
  • Up to 1,600 t — small industrial sections, lighting, frames.
  • 1,600-3,500 t — 6060/6063 architectural and 6082 machinery.
  • 3,500-6,000 t — rail, automotive structural, 6061/6082.
  • Above 6,000 t — large facade backbones and heavy structural; Exlabesa (6,500 and 8,500 t) and STEP-G Bonn (100 MN) are the European options in this band.
  • Direct extruder vs. system house
  • Hydro, Constellium, Exlabesa, Metra, Alu Menziken, Eural Gnutti, HAI = extrude. CORTIZO, ALUMIL, Aliplast/Corialis, Schüco, WERU = system and brand layers. Buy billet-level control and MTCs from the former; buy system warranty and architectural documentation from the latter.

Looking for a Reliable Aluminum Bar & Extrusion Profile Supplier?

As a leading aluminum bar and extrusion profile manufacturer, we supply with:

  • Alloy Series: 1050A, 3003, 5083, 6005A, 6060, 6061, 6063, 6082, 7020, etc.
  • Mill-Direct Prices
  • Certifications: ISO 9001 / IATF 16949 / EN 15088 / ASI CoC / EN 10204 3.1 MTC / EPD
  • Fast Global Shipping

Contact us today for a competitive quotation.

 

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *